Description

The SPD-100 is a solid- state, intrinsically safe tachometer. The gate time range (0.26 to 5.70 seconds) is field- programmable. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit, unlighted, LCD display. CSA and ABS Type approved.

SPD-100L Tachometer

TACHOMETER: signal-powered, 4- digit, lighted display

The SPD-100L is a solid- state tachometer. The gate time range (0.26 to 5.70 seconds) is field-programmable. It is well-sealed for rugged indoor and outdoor applications. It has 4-digit, lighted, LCD display.

Description 5/8-18 X 5.250 In Thread X 6.375 In, Hall-Effect Sensor, Senses Gear Teeth, Pin Or Hole (8-32Vdc Input)

Request Quote

Description

This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has a long reach (3.500 inches) and 5/8-18 thread.

Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL and some CSA approved pickups may be used with any instrumentation.

5/8-18x3.5"-30" Leads Speed Sensor

Request Quote

Descriptions

The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread.

Most CSA-certified magnetic pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation
 

5/8-18x6"-2 Pin, HIgh Sensitivity (min. Speed>300 RPM) Speed Sensor

Request Quote

Magnetic Pickup: intrinsically safe, power zener, extra long reach

Description

The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. The speed sensor produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has an extra long 6 inch threaded housing.

Description

This hall-effect sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is designed to sense ferrous material (gear teeth, hole, pin, etc.) for speed measurement down to zero-speed. The sensor outputs are TTL and Vin-based and are compatible with most PLC input cards. M920 has multiple thread sizes of UNF2A and M (metric) type, and thread lengths from 1.875” to 6”. 

Request Quote

Description

This magnetic pickup sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is a sensitive pickup suitable for mid-speed applications (300 to 500 minimum rpm), larger gear (>2 inch diam) applications. M321 has multiple thread sizes of UNF2A and M (metric) type, and thread lengths from 1.875” to 6”. The 300 series Stainless Steel housing is fully potted with hazardous area rated epoxy resin with no air gap inside, which makes it a reliable, robust and absolutely safe for use in Hazardous areas.

Description

Our new Series 8020 is a Pressure Relief Valve that offers ultra-high flow with maximum flow rate of 80 GPM. It incorporates all the manufacturing knowledge and experience that has earned Barksdale a reputation for top quality and reliability in the market. This unit is a 3/4" NPT relief valve intended for use in hydraulic systems. All stainless steel internals and a corrosion-resistant powder-coated external housing, makes this product perfect for heavy industrial environments in the most demanding applications.

Description

Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy, repeatability and high flow coefficients. Designed to provide years of trouble-free operation and virtually zero leakage, the Shear-Seal® design uses fluid pressure to maintain a leak-free metal-to-metal seal that improves with use.