Description

The UNS-VA/SB4 Bilge Guard is a level switch made of stainless steel for bilge monitoring without test function. The operation pressure is max. 3 bar, the material float is PE.

Features

• For mounting through top
• Without test function
• Rugged and sturdy design
• Mounting bracket
• 1 switch contact
• Approvals: DNV, BV, ATEX on request

Applications

• Shipbuilding
• Yachtbuilding
• Sewage treatment plant

Description

The UNS-VA/SB5 Bilge Guard is a level switch made of stainless steel for bilge monitoring with test function. The operation pressure is max. 3 bar, the material float is PE.

Description

The Single Level Switches UNS-VA1/4-VA52 is made of stainless steel.

Features

• G1/4" - Mounting thread
• 1 switch contact
• Mounting through top or through bottom
• Max. operating temperature: -40°C...+150°C

Applications

General level measurement at

• Tanks
• Containers
• Storage tanks for water
• Process industry

Request Quote

Description

The Barksdale Tank Level Transmitter Systems are sensors for remote indication level of liquid media. They operate according to the float principle with magnetic transmission (Permanent magnet, Reed switch and resistor chain). The liquid level is indicated on indicating instruments connected to the sensor.

The USE6200 provides a max. length up to 3000 mm and his constructed for applications in hazardous locations, category 1.

Description

The Barksdale Tank Level Transmitters are sensors for remote indication level of liquid media. They operate according to the float principle with magnetic transmission (Permanent magnet, Reed switch and resistor chain). The liquid level is indicated on indicating instruments connected to the sensor. The USE6000 provides a max. length up to 6000 mm.