Description

The level transmitter BLP2 is designed for continuous level measurement in water or waste water applications.
Two versions are available with ceramic sensor or with stainless steel sensor. The accuracy, as per IEC 600770, is 0.5% FSO for ceramic and 0.1% / 0.35% / 0.5% FSO for stainless steel. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer materials can be offered according to the customer-specific operating conditions.

Description

The level sensors BLP1 have been specifically designed for rugged use in the maritime and offshore applications.
The housing material CuNiFe, a special copper-nickel alloy, combined with various mounting options, allows for their use with a wide range of media found in maritime environments, as well as with different tank, container, and basin configurations.

Description

The UNS-VA/SB4 Bilge Guard is a level switch made of stainless steel for bilge monitoring without test function. The operation pressure is max. 3 bar, the material float is PE.

Features

• For mounting through top
• Without test function
• Rugged and sturdy design
• Mounting bracket
• 1 switch contact
• Approvals: DNV, BV, ATEX on request

Applications

• Shipbuilding
• Yachtbuilding
• Sewage treatment plant

Description

The UNS-VA/SB5 Bilge Guard is a level switch made of stainless steel for bilge monitoring with test function. The operation pressure is max. 3 bar, the material float is PE.

Description

The Single Level Switches UNS-VA1/4-VA52 is made of stainless steel.

Features

• G1/4" - Mounting thread
• 1 switch contact
• Mounting through top or through bottom
• Max. operating temperature: -40°C...+150°C

Applications

General level measurement at

• Tanks
• Containers
• Storage tanks for water
• Process industry

Request Quote

Description

The Barksdale Tank Level Transmitter Systems are sensors for remote indication level of liquid media. They operate according to the float principle with magnetic transmission (Permanent magnet, Reed switch and resistor chain). The liquid level is indicated on indicating instruments connected to the sensor.

The USE6200 provides a max. length up to 3000 mm and his constructed for applications in hazardous locations, category 1.