- Manual for BDS3000 (EN)
- BDS3000 Datasheet (EN)
- Generation 3000 Brochure (EN)
BDS3000 now with IO-Link option! BDS3000 is an electronic differential pressure switch was built for filtration systems applications with differential pressure ranges that vary up to 500 psid and with a maximum common pressure of 2,500 psi.
Transmitter functionality is offered via supplying analogue output signals 0 to 10V DC and 4 to 20mA, and is field selectable if needed. The full scale output can be adjusted to as low as 25% of FSO during installation enabling more flexibility, reducing the need to stock multiple pressure ranges.
The large 14 segment LED angled display is aesthetically pleasing and allows clear readability of the process pressure from multiple viewing angles. Mounting holes are built-in, making it easier to install in various orientations to fit your system needs. Even if the unit must be mounted upside down, the internal software is capable of rotating its display 180°. Plus, the 320° rotatable electrical connection and display housing makes installing the unit very simple, helping reduce installation costs allowing for versatility of installation method and location. Robust EMI protection allows for stable output in today’s factories where EMF and high powered walkie-talkies and VFD’s are present. Additionally, the IP67 class rated housing makes this unit suitable for the wettest of environments, and even full submersion.
BDS3000 with IO-Link combines Barksdale’s core strength of technical product expertise and customization capabilities with the forward looking communication protocol of IO-Link, supporting Industry 4.0, one of the key visions in the global industrial market.
IO Device Description look up: IODD Finder
Pressure Range Code | Differential Pressure | Proof Pressure | Proof Pressure | Common Pressure |
P1>P2 (PSID) | P1>P2 (PSID) | P2>P1 (PSID) | P1=P2 (PSI) | |
0015P | 0-15 | 30 | 15 | 2500 |
0100P | 0-100 | 200 | 100 | 2500 |
0500P | 0-500 | 1000 | 150 | 2500 |
Sensor element: | Piezoresistive sensor |
Materials: Wetted parts: Enclosure: Seals: | Stainless steel fittings 316 L Stainless steel sensors 304 Stainless steel, PBT FKM fluoroelastomer |
Operating elements: | 3 easy-response push-buttons |
Enclosure rating: | Type 4X (IP65) / Type 6 (IP67) |
Protection class: | III |
Electrical connection: | Plug M12 x 1, 5-pin |
Process connection: | 1/4” NPT female (low and high sides) |
Dimensions: | 3.00 x 1.60 x 4.81 inches |
Weight: | Approx. 1.5 lb |
A/D-Converter: Resolution: Scanning rate: | 12 bit (4,096 steps per measure span) 1000/s |
Linearity error: | < ±0.5 % f. s. at +25 °C |
Temperature influence: | TC zero < ±0.2 % FSO / 10K TC span < ±0.3 % FSO / 10K |
Compensation range: | 32°F to 122°F (0°C to +50°C) |
Repeatability: | ±0.1% f. s. |
Temperature range: Media: Electronics: Storage: | -13°F to 212°F (-25°C to +100°C) 14°F to 158°F (-10°C to +70°C) -22°F to 176°F (-30°C to +80°C) |
Power supply1: | 15 to 32 V DC, reversed polarity protected (SELV, PELV), Class 2 |
Power consumption: | Approx. 50 mA (without load) |
Digital display: Display rate: | 4-digit 14-segment LED red display, digit height .35 inches (9 mm) 20/s |
Error display: | LED RED and alphanumeric display |
Analog output: Current output: Scanning rate: Voltage output: Rating: Adjustment range: | 4-20 mA 2 ms 0 to 10 V DC max. 10 mA 25% to 100% f. s. |
Transistor switching outputs: | |
Switching function: Switching output: Adjustment range for switching point and hysteresis: Switching frequency: Load: Delay: Status display(s): | Normally open / normally closed, standard /window mode and diagnosis function adjustable PNP 0% to 125% f. s. Max. 100 Hz Max. 500 mA, short-circuit-proof 0.0 s to 50.0 s adjustable LED(s) red |
IO-Link Communication Interface: | |
Transmission type: IO-Link revision: SDCI standard: Profiles: SIO modules: Required master port type: SIO output: Min. process cycle time [ms]: Device ID: | COM2 (38.4 kBaud) 1.1 IEC 61131-9 Smart Sensor, Process Data Variable, Device Identification, Device Diagnosis Yes A 1 analog / 2 binary (switch points) [see product configurator] 2.5 0x071... |