Dynalco® Magnetic Pickups, Sensors and Switches
Reliably monitor and control engines and pumps
Barksdale Dynalco® magnetic pickups, speed sensors, speed monitors, and switches measure and control the speed of engines and pumps in industrial, oil and gas, and transportation applications.
Our Catalyst Monitor meets the RICE NESHAP Continuous Parameter Monitoring requirements. It is a low cost solution that comes pre-configured and is quick and easy to install and get running. CSA approved. The…
Magnetic Pickup M204-6
5/8- 18x6"- 2 Pin- Zener-Limited Ultra High Sensitivity (min. Speed<300 RPM) Speed Sensor
Passive (Variable Reluctance)- Ordinary Area Mag Pickup
Magnetic Pickup: intrinsically safe, power zener, extra long reach
The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300…
Magnetic Pickup M233-6
5/8-18x6"-2 Pin, HIgh Sensitivity (min. Speed>300 RPM) Speed Sensor
Passive (Variable Reluctance)- Hazardous Area Mag Pickup
s
The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread.
Most CSA-certified pickups retain that approval only when used as…
Magnetic Pickup M319
5/8-18x3.5"-30" Leads Speed Sensor
Passive (Variable Reluctance)- Hazardous Area Mag Pickup
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has a long reach (3.500…
Magnetic Pickup M321
Passive (Variable Reluctance)- Hazardous Area Speed Sensor
Multiple Thread Sizes and Lengths, High Sensitivity (min. Speed>300 RPM)
This magnetic pickup sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is a sensitive pickup suitable for mid-speed applications (300 to 500 minimum…
5/8-18 X 5.250 In Thread X 6.375 In, Hall-Effect Sensor, Senses Gear Teeth, Pin Or Hole (8-32Vdc Input)
Magnetic Pickup M920
Multiple Thread Sizes and Lengths Speed Sensor
Active (Powered)- Hazardous Area Mag Pickup
This hall-effect sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is designed to sense ferrous material (gear teeth, hole, pin, etc.) for speed…
The MTH-103E is a newer version of the MTH-103D. The function, package size and wiring are the same although the MTH-103E has a keypad that replaces the old push button, making programming easier and quicker.…
SPD100 Series
SPD-100 Tachometer
Tachometer: Signal-Powered, 4-Digit. Intrinsically Safe, Unlighted Display
The SPD-100 is a solid- state, intrinsically safe tachometer. The gate time range (0.26 to 5.70 seconds) is field- programmable. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit,…
SST-2000A Speed Transmitter
SPEED TRANSMITTER, CSA General Classification and CE approved
Receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to…
Reliable, accurate over/under speed protection, transmitter with models upto 4 standard relay set-points and LED or keypad configuration display options.
The SST7000 use a pulse or frequency input to provide…
Tachometer / Hourmeter / Monitor Hourmeter with tachometer and 2 analog input channels. Single relay output for alarm/shutdown. CSA approved.
Features
Accepts thermocouple, 4-20 mA & DCV…
The UM-600 monitors up to 6 channels of any analog signal plus engine speed and hours and provides an alarm and two different shutdown signal upon user-defined set-points being exceeded. These alarms and…