header_FAQ

Hazardous

Hall Effect Magnetic Pickups

Magnetic Pickup: intrinsically safe, power zener, extra long reach

Description

The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has an extra long 6 inch threaded housing.

Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.

Standard Sensitivity (min. Speed > 500 RPM)

  • M101 - 5/8-18 x 1.125” - 2 Pin
  • M101-6 - 5/8-18 x 6” - 2 Pin
  • M104-6 - 3/4-20 x 1.875” - 30” Leads
  • M107 - 5/8-18 x 1.125” - 2 Pin - Power Source
  • M131 - 5/8-18 x 4” - 2 Pin
  • M131-6 - 5/8-18 x 6” - 2 Pin
  • M137 - 3/8-24 x 1.250” - 6” Leads - Miniature, Gear <2”
  • M143 - 10-32 x 0.875” - 14” Leads - Miniature, Gear <2”
  • M151 - 5/8-18 x 2.5” - 2 Pin
  • M183-6-N - No Header, #20, 12” Leads
  • M189 - 5/8-18 x 2.5” - 2 Pin
  • M192 - 5/8-18 x 4” - 72” Leads
  • M304 - 3/4-16 x 4” - 2 Pin
  • M320 - M18 x 1.5 - 2 Pin
  • M343 - 3/4-20 x 2” - 6 Pin - Dual output (Bi directional)
  • M354 - M16 x 1.5 - 17” cable
  • M356 - 3/4-16 x 2” - 17” cable - Power Source
  • M332 - 5/8-18 x 2.5” - 2 Pin
  • M193 - 5/8-18 x 4” - 72” Leads

High Sensitivity (min. Speed > 300 RPM)

  • M102 - 5/8-18 x 1.125” - 2 Pin
  • M133 - 5/8-18 x 4” - 2 Pin
  • M138 - 3/8-24 x 1.250” - 6” Leads - Miniature, Gear <2”
  • M155 - 5/8-18 x 1.125” - 2 Pin - Low Drag, flow meter
  • M168 - 5/8-18 x 1.75” - 12” Leads
  • M183 - 5/8-18 x 2.5” - 2 Pin
  • M183-6 - 5/8-18 x 6” - 2 Pin
  • M202-6 - 5/8-18 x 6” - 2 Pin
  • M207 - 3/4-16 x 4” - 2 Pin - Power Source
  • M233-6 - 5/8-18 x 6” - 2 Pin
  • M303 - 5/8-18 x 1.125” - 2 Pin
  • M334 - 3/8-24 x 1.25” - 12” cable - Miniature, Gear <2”

Ultra-High Sensitivity (min. Speed < 300 RPM)

  • M142 - 5/8-18 x 1.125” - 2 Pin
  • M184 - 5/8-18 x 2.5” - 2 Pin
  • M185 - 5/8-18 x 4” - 2 Pin
  • M203-6 - 5/8-18 x 6” - 2 Pin - Zener-Limited
  • M204-6 - 5/8-18 x 6” - 2 Pin - Zener-Limited
  • M205-6 - 5/8-18 x 6” - 2 Pin - Zener-Limited
  • M208 - 3/4-16 x 4” - 2 Pin - Power Source
  • M281 - M16 x 1.5 - 2 Pin

Frequently Asked Questions

Find answers to common questions below

A1: Hazardous Hall Effect Pickups are a type of magnetic pickup designed for use in hazardous environments. They are part of Barksdale's product offerings under the Speed category, specifically for applications that require reliable performance in potentially explosive atmospheres.
A2: Hall Effect Pickups can be found under the Speed category, which is a Dynalco® brand section on the Barksdale website. They are listed under both Hazardous and Non-Hazardous subcategories of Magnetic Pickups.
A3: In addition to Hall Effect Pickups, Barksdale offers Active and Passive Pickups, Speed Switches/Transmitters, and Tachometer/Hour Meters/Monitors under the Speed category. These products are designed to cater to various speed measurement and monitoring needs.
A4: Hazardous Hall Effect Pickups are suitable for environments that are potentially explosive or hazardous. They are designed to provide reliable performance and safety in such challenging conditions.
A5: Yes, Barksdale offers a wide range of products beyond Speed-related items, including those in the Flow, Level, Pressure, and Temperature categories. Each category includes various products like valves, transmitters, switches, and transducers tailored to specific industrial needs.